Sentinel 626 Carpet Adhesive Remover - Mastic Stripper - 5 Gal

Sentinel 626 is a powerful biodegradable formulation designed specifically for quickly removing latex, acrylic and pressure sensitive adhesives from concrete, terrazzo, ceramic and vinyl tile or wood substrates.  Sentinel 626 is odorless, nonflammable, and biodegradable.

DIRECTIONS

Removal of latex, acrylic and pressure sensitive adhesives:

Step One:

Apply 626™ directly onto the adhesive. Use a broom, mop or squeegee to agitate and maintain even coverage while keeping the adhesive surface wet. Allow 626™ to soak and penetrate for 30-60 minutes.

Step Two:

Scrape softened adhesive from the floor (razor scrapers or squeegees are generally preferred). Repeat steps one and two if necessary and dispose of the waste.

Step Three:

Rinse the sub-floor thoroughly the clean water. Allow surface to dry.

Removal of sheet vinyl/linoleum backing:

Once the wear layer is removed, mix 1 part HOT water to 4 parts 626™ ( 1 quart of HOT water to 1 gallon of 626™ ) and apply directly to the remaining backing. Maintain even coverage and a wet surface for 1-2 hours or until backing and adhesive can be easily removed together with floor scrapers. Rinse the surface with clean water, and allow to dry.

Removal of carpeting:

Using a utility knife, cut the carpeting in 1-foot strips (making sure to cut through the carpeting to the sub-floor). Mix 1 part HOT water to 1 part 626™ ( 1 gallon HOT water to 1 gallon 626™ ) and pour directly onto carpet to be removed. Maintain even coverage and completely saturate carpeting with 626™ . Allow to soak 4 hours or overnight. Pick up carpet strips and follow latex removal procedures.

Coverage for the mastic remover will range from 25-75 square feet per gallon.

Product Data Sheet 

MSDS Sheet

*on webstore orders over $100 in the contiguous US; some exclusions apply